MPPT sucks the exudate fluid away from the wound surface by means of capillary forces. Capillary forces only work when there is excess fluid present.
Capillary action is the movement of water within the spaces of a porous material due to the forces of adhesion, cohesion, and surface tension. In
MPPT consists of micropore particles that absorb and remove wound exudate MPPT works in three steps: Absorption, Pumping by capillary forces and Evaporation: The Exudate
MPPT should be stored refrigerated between 2 and 10 degrees C. MPPt can comfortably be handled at room temperature. However, it is important to shield
Yes. just make sure the entire wound area and the edges are well covered with MPPT. There is no need to apply excess product as
The secondary dressing to cover and hold the MPPT layer in place should be light, dry and highly permeable. This allows the wound exudate to
The use of antiseptics is discouraged when preparing the wound for MPPT application. We strongly advise against the use of antiseptics that are cytotoxic to
Remove the old MPPt layer, irrigate with water, dry gently, apply a fresh layer of MPPT and apply a fresh permeable bandage.
Manage the wound by reinstating the use of MPPT as it is normally used – see Instructions for Use. If the wound has previously benefitted
A clean wound has no cloudy exudate, pus, slough, maceration or biofilm.Simultaneously, in MPPT wounds, granulation tissue will often be noticeable in the wound bed
NFEC, Rushington Business Park
Chapel Lane, Totton
Southampton SO40 9LA, United Kingdom
Phone: +44(0)23 8081 2325
E-mail: contact @ willingsford.com
© 2025 All Rights Reserved. Registered in England and Wales. No. 7462271